Joint
Pin
Designed for internal 'end-to-end' connection of standard
scaffold tube.
Weight: 0.85kg
Conforms to BS1139 Part 2 1982 |
|
| |
|
Putlog
Head
Quickly
converts a standard scaffold tube into a putlog, enabling
maximum utilisation of scaffold tube stocks.
Weight: 0.54kg |
|
| |
|
Roofing
Coupler
Designed
for 'hole-free' rapid clamping of scaffold tube above
and below corrugated sheeting.
Weight: 1.41kg
Roofing
Coupler
The
galvanised steel or plastic coated sheet has a corrugation
pitch of 76.2mm and thickness
of 0.5mm to 0.7mm
|
|
| |
|
| |
|
|
Sleeve
Coupler
A
one piece heavy duty coupler for rapid connection featuring
a central baffle plate for correct tube positioning
and unique individual one side unlocking safety feature.
Weight: 1.13kg
Conforms
to BS1139 Part 2 1982.
Safe working loads to BS5973.
Tension
load: 3kN
|
|
| |
|
Fixed
Base Plate (Socket Type)
Made out of 150 x 150 x 6 mm base plate with 75 mm
socket designed to receive 48.3 mm OD tube. |
|
Fixed
Base Plate (Pin Type)
Base Plate
A
120 mm x 120 mm steel plate providing a full bearing
surface for load distribution from vertical.
|
|
| |
|
| Single
Clamp
This
is a highly economical fitting for fastening scaffolding
tubes to girders with a single bolt. Suitable for loads
at right angles to flanges only. Must be used in pairs.
|
|
| |
|
.jpg)
