|
PRESSED
STEEL FITTINGS
Our products are designed for fast,
efficient on-site installation. Zinc-coated and chrome
passivated (unless otherwise indicated on this website),
for maximum corrosion prevention, they require virtually
no maintenance. Additionally, all scaffold fittings
are supplied with fully captive nuts. All our scaffold
fittings are designed to accommodate British Standard
48.3mm O/D scaffold tube, unless otherwise stated. We
operate a rigorous quality assurance policy. All products
are produced in accordance with British and European
standards and manufactured.
PRESSED
DOUBLE COUPLER
A
self-gripping wrapping facility which provides a
strong positive grip when connecting standards to
ledgers.
weight: 0.91kg
Maximum
safe working loads to BS5973. Slip along tube:
6.3kN
Conforms
to BS1139 Part 2 1982
|
|
Pressed
Double Coupler
Size: 48 mm & 51 mm
Min. Slip Load: 12.5 KN.
Min. Distortion Load: 17 KN. |
|
|
Swivel
Coupler
A
tough positive grip enabling two tubes to be connected
together at any angle, especially for use in cross
bracing.
Weight: 1.02kg
Maximum
safe working loads to BS5973. Slip along tube:
6.3kN.
Conforms
to BS1139 Part 2 1982
|
|
Swivel
Coupler
Size: 48 mm & 51 mm
Min. Slip Load: 12.5 KN.
Min. Distortion Load: 17 KN. |
|
|
Putlog
Coupler
For
rapid erection or dismantling of putlogs and transoms.
featuring a special one piece "wrap-over".
weight: 0.77kg
Maximum
safe working loads to BS5973. Slip along tube:
0.53kN
Conforms
to BS1139 Part 2 1982
|
|
Putlog
(Single) Coupler (Forged)
Size: 48mm,51mm
Min. Slip Load: 12.5 KN.
Min. Distortion Load: 2.30 KN. |
%20COUPLER(FORGED).jpg)
|
| |
|
|
.jpg)
.jpg)
.jpg)
