SPAN DECKING SYSTEM

The SPAN Decking System is designed to support a variety of bay sizes with a maximum load of 40 kN on any supporting leg . For maximum economy, the rapid strike drophead offers the facility for early striking of the decking system. When the support plate on the drophead remains in position to support the slab, the decking beam can be dismantled and reassembled elsewhere to enable greater utilization of the equipment. This Decking system is ideally suited for construction of reinforced concrete suspended slabs, with plywood shuttering, and incorporates the benefits of early striking. Large grid sizes of up to 2.5 x 1.8 m ensures speedy erection and different sizes of primary and secondary beams can give a range of twelve support modules. Notching of plywood over the dropheads is eliminated, and standard sizes of plywood can be used.





DECKING BEAM

The decking beams are designed with a very wide top flange thereby reducing maintenance costs by increasing the lifespan of the plywood. The decking beams are available in all the standard sizes, but any special sizes can be constructed for a nominal charge.




INFILL BEAM

Infill beams are used to provide the transom support underneath the plywood. All standard sizes are manufactured, as well as any special sizes upon request. They have a wide top which gives more support for the plywood.

DROP HEAD
The most important part of shuttering is the drophead. Made with an extra-strong steel wedge, the dropheads allow the beams, infills and panels to be lowered at a hammers stroke. The wedge is specially constructed to endure repeated strokes of the hammer.

SOCKET ADAPTER










UNIVERSAL JACK
Universal jacks allow differences in height to be maintained. The base jacks like the universal jacks are either hollow or solid with deep threads. Easy adjustments can be made with the universal jacks special spindles.